Awning BREZZA 180: materials and care | Carcamp

300D rip-stop polyester

Waterproof 2000 mm; internal black PU coating full Silver out; PVC cover 650/1000D

UV 50+; reflective top layer

Structure / arms in black aluminium

2 three-section legs/uprights; pole extension approximately 101–240 cm

Hinges in stainless steel 304; brackets same as the OASI family

2 LED strips with switch + 1 USB cable CE-RoHS certification

Elongation of approximately 55 cm

Absent

Integrated storage pockets on freestanding models

6 walls that can be connected individually

Silicone/rubber logo; 3 cloth locking straps; same accessory family as OASI

200-220 cm (based on the height of the applied walls)

Useful anchoring surface 118 cm; non-clampable areas 16,5 cm per side; bracket dimensions 22.5 × 19 × 4,5 cm

Main body with self-supporting structure and 2 main arms

bracket size approximately 22.5 × 19 × 4,5 cm

Bolts, two bracket plates, 2 ratchet wrenches from 13 mm in chromed steel

2 three-section uprights; extension approximately 101–240 cm

2 orange ratchets with 3.2 m 8 mm reflective cord

1 USB cable, 3 pegs, 2 normal rope

2 x 13 ratchet wrenches, 1 USB cable, 3 pegs, 2 ropes, 2 fixing plates, 2 ratchet straps 4 telescopic poles, 1 pole containment bag

PAP 20; Reinforced outer carton; 2 kg

EPS 06; To be verified on a sample; 0,02 kg

LDPE 04; To be verified on a sample; 0,18 kg

LDPE 04

LDPE 04

FOR 50

2,2 kg

Clean with water and neutral detergent, avoiding solvents, bleach and aggressive products.

Close the awning only when the fabric is completely dry, to limit humidity and mold.

After use in rain or humidity, reopen and let the cover dry before long periods of non-use.

Periodically check brackets, bolts, profiles and anchoring points, especially after long journeys.

In windy conditions, always use ropes, pegs and tensioning systems; close the awning in case of intense conditions.